Trace PS2524 2500-watt 24-volt Home Inverter Power Station - $750 Trace PS2524 2500-watt 24-volt Power Station with DC Disconnect and Remote Control Panel Purchased new in 2001 for battery and generator backup during power blackouts (batteries not included). Used for 4 years then put in storage due to a change in living arrangements (aka divorce). No damage, excellent condition. INCLUDES: • Trace PS2524 Power Station • Trace DC175 175-amp DC Disconnect/Overcurrent Module (circuit breaker) • Trace SWRC Remote Control/Programming Panel with 25' Cable • Trace 1799-1 Battery Temp Sensor with 15' Cable • Owner's Manual • Assorted 00 cables for up to 6 12V batteries with bolt-tab connectors (additional or longer cables may be needed and are not included) OPERATING MODES: • Inverter Mode - DC to AC inverter with sine wave output, high starting surge, power saving search mode, low idle current, and very high efficiency DC to AC conversion. • Charger Mode - Low AC current distortion, three stage, temperature compensated, high amperage (up to 20 A) battery charger. • Inverter/Charger Mode - Automatic transfer from inverter to battery charging upon presence of utility or generator AC power source. • Generator Support Mode - Automatic "no glitch" switching from charger mode to inverter mode allowing the inverter to assist the generator in starting and powering large loads. Adjustable generator support current and voltage thresholds. • Utility Back-Up Mode - Phase synchronized fast AC transfer switching for utility back-up power supply applications. Includes adjustable AC transfer voltage and line conditioning ability. • Utility Inter-Active Mode - Excess power from charging sources or stored power from the battery can be "sold" back into a utility grid. Also allows selling of the stored energy in the battery during a specific time period. • ENERGY MANAGEMENT MODES: • Time of Day Metering Mode - Onboard clock to set inverter and charger operating time periods. This mode can be used with "time of day" metering to shift utility grid consumption to off-peak periods (where available). • Peak Load Shaving Mode - Used to limit the draw of AC loads from a utility grid by powering it from the batteries. The batteries are recharged when the AC loads are reduced. This can "level" the load on the utility grid. • Low Battery Transfer Mode - Automatic transfer of the AC loads from the batteries to the utility grid when the system reaches an adjustable low battery voltage setting. Independent settings allow control of when the AC loads return to battery once it is recharged. • ADDITIONAL FEATURES: • Three-stage battery charging with fully adjustable charge settings and battery temperature sensing. • AC and DC voltmeters and AC ammeters to allow monitoring of inverter, generator, and utility grid. • Adjustable sellback current level for utility inter-active mode. Please contact seller with any questions or to obtain a .pdf copy of the Owner's Manual. Please call or text Bill between 9am and 9pm ONLY Local pickup only Thanks for looking =)