Trace Sine Wave Inverters	
	
	
The Trace sine wave inverters provide sinewave output with high efficiency, high surge and low idle current. With three micro-processors and bi-directional power topology, it is over 90% efficient through most of its load range, peaking at 96% efficiency. The new “soft start” system allows the inverter to run heavier loads with improved reliability. The SW inverters can be programmed to perform automatic generator start and stop, automatic load sensing and generator support, and includes protective circuitry which guards against downtime. Indicators show over-current, over-temperature, short circuit, and low and high battery voltage conditions. All Trace SW inverters include a built-in, fully automatic, three-stage battery charger, designed for maximum charging and minimum generator time and fuel. Two year warranty, ETL listed to UL standards. SW Series dimensions are: 15” x 22.5” x 9”.

The PS Series is a high-efficiency inverter like the SW series without some of the “bells and whistles” and at a lower price. Factory pre-set inverter and charger functions make this series super-simple to operate. Setting adjustment and field monitoring can be accomplished with the optional Sinewave Remote Control (SWRC) or Sinewave Communications Adapter (SWCA). The PS series transfer relay is rated at 50 Amps and is UL listed. PS Series dimensions are 15.25” x 22.5” x 6.5”.
SW and PS Series Domestic Voltage Inverters
Name	Price
PM-SW4048/3PH	$15,457.00
PM-SW5548/3PH	$17,125.00
SW2512	$2,675.00
SW4024	$3,495.00
SW4048	$3,495.00
SW5548	$3,995.00
PS2524	$2,165.00
PS2512	$2,165.00